with mounting block and PROFIBUS interface
Mini CORI-Flow are precise and compact mass flowmeters and controllers, based on the Coriolis measuring principle. Coriolis flowmeters are unmatched in accuracy. When applied for liquids, the mass flow accuracy is better than ±0,2% Rd.
Instruments of the mini CORI-Flow series contain a uniquely shaped, single loop sensor tube, forming part of an oscillating system. When a fluid flows through the tube, Coriolis forces cause a variable phase shift, which is detected by sensors and fed into the integrally mounted pc-board. The resulting output signal is strictly proportional to the real mass flow rate. The mini CORI-Flow features density and temperature of the fluid as secondary outputs.
Technical Data
| Flow rate range |
0.2 – 50 ml/min |
| Flow rate accuracy |
± 0.2 % of rate * |
| Wetted materials |
stainless steel AISI 316 or equivalent optional Hastelloy-C22 |
| Outputs |
0 – 5 (10) Vdc or 0 (4) – 20 mA |
| Control |
standard: RS–232 (8-pinDIN male connection) Profibus-DP® bus:(5-pin M12 female; power 8-pin DIN male) DeviceNet™ Modebus-RTU; LonWorks Flow bus (5–pin M12 male) |
| Special features |
additional: Profibus interface |
| Power supply |
+15–24VDC ±10 % max. ripple recommended: 50mV tt |
| Weight |
Meter: 1.2 kg Controller: 1.7 kg |
| Note |
* optimal accuracy will be reach after approx. 30 minutes after instrument power up |
-
Flowmeter mini Cori-Flow
Flowmeter mini Cori-Flow
ICON Scientific, Inc
