AZURA P 6.1L Isocratic Pump with 10 ml pump head, Ceramic

Technical Data

Max. flow rate	10 ml/min
Flow rate range	0.001 – 10 ml/min
Flow rate increment	0.001 ml/min
Maximum delivery pressure [psi]	5800 psi
Maximum delivery pressure [bar]	400 bar
Maximum delivery pressure [MPa]	40 MPa
Pressure range
Pump head materials	Ceramic
Gradient	isocratic
Leak management	Yes
Wetted materials	GFP (graphite fiber reinforced PTFE), sapphire, ruby, aluminum oxide (Al₂O₃)

Best working conditions	0.1 – 8.0 ml/min
Continous working conditions	0.1 – 4.0 ml/min
Flow rate accuracy	< 1 %
Flow rate accuracy conditions	measured at 5-80 % of flow range, using ethanol
Flow rate precision	0.1 % RSD
Flow rate precision conditions	based on the retention time at constant room temperature
Gradient range
Gradient minimum increment
Degasser	No
Solvent selection valve	No
Pulsation	< 2 % Amplitude (typically: < 1,3 %) or < 3 bar (0,3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
Pulsation compensation	Active pressure and pulsation compensation
Active piston seal wash	Yes
Piston seal washing	Yes
System protection	Soft start, Pmin und Pmax are programmable
Pump head inlet (standard)	UNF 1/4-28 Thread
Pump head outlet (standard)	UNF 10-32 Thread

Interfaces	LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control	LAN, Analog and event control, Mobile Control
Analog inputs	Flow rate, 0 – 10 V via pin header connectors
Analog outputs	8 event outputs (TTL, OC, Relais) and 24 V

Power supply	100 – 240 V; 50 – 60 Hz; Maximum power consumption 100 Watt
Dimensions	361 mm x 208.2 mm x 523 mm (W × H × D)
Weight	11.5 kg
Leak sensor	Yes
Ambient conditions	4-40 °C (39.2-104 °F) Air humidity below 90%, non-condensing

Contact Us Today(301) 330-ICON (4266)