General Information
| Max. flow rate | 50 ml/min |
|---|---|
| Flow rate range | 0.01 – 50 ml/min |
| Flow rate increment | 0.01 ml/min |
| Maximum delivery pressure [psi] | 4350 psi |
| Maximum delivery pressure [bar] | 300 bar |
| Maximum delivery pressure [MPa] | 30 MPa |
| Pressure range |
|
| Pump head materials | Stainless Steel |
| Maximum viscosity | 100 mPa·s |
| Liquid temperature range | 4−60 °C (39.2−140 °F) |
| Gradient | Isocratic |
| Leak management | No |
| Wetted materials | GFP (graphite fiber reinforced PTFE), stainless steel, FKM, PEEK, sapphire, aluminum oxide (Al2O3), ruby, Zirconium oxide |
Detailed information
| Best working conditions | 0.1 – 40.0 ml/min |
|---|---|
| Continuous working conditions | 0.1 – 20.0 ml/min |
| Flow rate accuracy | ± 1% |
| Flow rate accuracy conditions | measured at 5 – 80% of flow range using ethanol |
| Flow rate precision | < 0.1 % RSD |
| Flow rate precision conditions | based on retention time at constant room temperature |
| Degasser | No |
| Pulsation | < 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at 1 mL/min ethanol, at all pressures> 1 MPa (10 bar, 147 psi). |
| Piston seal washing | Active |
| System protection | soft start, Pmin and Pmax are programmable |
| Pump head inlet (standard) | UNF 1/4-28 Thread |
| Pump head outlet (standard) | UNF 10-32 Thread |
Communication
| Interfaces | LAN, Pin header connectors (Analog IN, Start In, Error IN), Touchscreen |
|---|---|
| Control | LAN, Analog and event control, |
| Analog inputs | Flow rate, 0 – 10 V via pin header connectors |
| Analog outputs | 8 event outputs (TTL, OC, Relais) and 24 V |
General
| Power supply | 100 – 240 V; 50 – 60 Hz; Maximum power consumption 40 Watt |
|---|---|
| Dimensions | 399 mm x 242 mm x 165 mm (D x W x H) |
| Weight | 5.1 kg |
| Leak sensor | No |
| Ambient conditions | 10–40 °C (50–104 °F) Air humidity: below 90 % humidity, non condensing |
ICON Scientific, Inc
